Skip to content

Australian Utilities and Scada Technologies

Get the Flash Player to see this player.
IP Tube GT1 SS7 MONIP Tube RS530DL
IP Tube GT1 SS7 SIG

IP Tube GT1 SS7 SIG

Price per Unit (piece): Call for Pricing

Ask a question about this product

SS7 Signalling Circuit Extension Over IP:

The IP Tube GT1 SS7 SIG delivers SS7 signaling over cost effective IP networks without costly replacement of existing equipment. Benefits are realized immediately, simple installation emulates existing point to point circuits without reconfiguration of the MSC, STP or HLR. The IP Tube GT1 SS7 SIG encapsulates the SS7 Message Signal Units (MSUs), Link Status Signal Units (LSSUs), and optionally Fill-In Signal Units (FISUs) into IP packets from the T1 interfaces of:

  • Telco Switches
  • Mobile Switching Centers
  • Signal Transfer Points

Home Location RegistersThe IP Tube GT1 SS7 SIG transparently transports SS7 messages over IP networks. SS7 signaling network elements such as local and tandem switches, Mobile Switching Centers, Signal Transfer Points and Home Location Registers that are interconnected to remote network elements by IP Tube GT1 SS7 SIGs are able to transmit their signaling messages over cost effective and flexible IP networks.

IP Tube GT1 Standard Features: 

Industry Standard SS7 Framer
The IP Tube GT1 SS7 SIG uses an industry standard SS7 Framer to receive and transmit SS7 messages. Minimal IP bandwidth is required to deliver SS7 since only Message Signal Units (MSUs), Link Status Signal Units (LSSUs) SS7 frames are encapsulated into IP packets.

Assured Delivery Protocol
In order to assure high quality communications over links with intermittent or noisy performance, such as Wireless or Broadband over Power Line, the IP Tube GT1 SS7 SIG employs Engage’s robust Assured Delivery Protocol with the following benefits:

  • Packet out of sequence detection and re-sequencing
  • Duplicate skipping,
  • Lost packet retransmission with configured delay
Dual LAN Interfaces
All IP•Tube GT1 models ship with dual 10/100BaseT Ethernet LAN ports. The dual Ethernet interfaces provide for:
  • Management interface on LAN port 2 when LAN port 1 is connected to a VPN tunnel
  • The LAN ports can be configured to support connections over 2 opposite ADSL links
  • Alternator Option for load balanced SDSL interconnects
  • Protector Option for Redundant Packet Path connections with Constant or Switch Over Criteria

Service Quality Packet Prioritizing
The IP Tube GT1 uses the Type of Service byte in the IP packets and 802.1p/q mac level prioritization to prioritize the encapsulated SS7 Messages.

VPN Network Management: 

Interconnecting the IP Tube GT1 through a Virtual Private Network with a sufficient real time committed information rate ensures that the required quality of service is provisioned. The IP Tube GT1's second Ethernet interface provides a management port when the first Ethernet interface is connected to a VPN. Each Ethernet LAN interface features independent IP network configurations.

 

 

IP Tube GT1 Optional Features:

T1 Drop and Insert OPTION -D&I
The 2nd T1 Interface can be activated to provide a Drop and Insert interface for direct inline connection to the SS7 DS0 without requiring a DACs.

T1 Mutiplexor OPTION -MUX
The IP Tube GT1 SS7 SIG with the MUX option has the ability to support remote SS7 messaging taps from 24 SS7 timelsots.

Protector OPTION -PRO
The protector option utilizes the second LAN interface as a redundant path for the interconnection of the IP encapsulated T1 Circuit. The extension of the T1 circuit has a fault tolerant link that is configured to always on, or with switch over criteria.

Protector OPTION -EnPRO
The Enhanced version has configuration parameters that enable a secondary packet path with high relative delay to primary path be synchronized. The packet sequence delay synchronization ensures concurrent redundancy with a high degree of error tolerance. Error free operation is accomplished when a primary or secondary Packet is not received and a redundant duplicate packet is available. The IPTube also supports the transmission of multiple duplicate packets to support Mission Critical Circuit extension with redundancy that is only limited by the bandwidth provisioned.

Pay-As-You-Grow Field Upgrades
The IP Tube GT1 SS7 SIG has configurations with 1 to 4 integrated T1 interfaces each of which supports 1 to 31 SS7 Communication links. The IP Tube GT1 SS7 SIG is designed for Pay-As-You-Grow expansion. Customers can elect to economize initial installation by purchasing a single active T1 port, and then enabling an additional SS7 DS0s or T1 ports via an option license key.

Rack Mount Kit
The IP Tube family is ready for your most demanding central office or data center environments. With the Rack Mount Kit, IP Tube products are easily installed in 19" and 23" racks. Easy access to both front and rear sides facilitates technician maintenance procedures.

Technicial Specifications:

T1/Fractional T1 Specifications: 
  • 1-4 Integrated T1 DSuUCSUs with with -36dB sensitivity
  • Framing - ESF or D4 • Coding - B8ZS or AMI
  • Supports DS0 assignments from 1 to 24 • 56K or 64K SS7 Data Rates
  • Mux Mode - Non Contiguous Configuration x-y,z Supported
SS7 Over IP Protocol: 
  • SS7 Frame UDP encapsulation with Assured Delivery
  • Transmission Control Protocol (TCP)
  • Network Tranparent - no point code required
  • Type of Service and Mac layer 802.1p/q QOS
LAN Network Interface: 
  • Two 10/100BaseT Full/Half Ethernet
  • Auto negotiation or Configured Speed and Duplex
LAN Network Protocols Supported: 
  • IP, TCP, UDP, ICMP, SCTP
  • Telnet
TFTP Online Upgrade Capable (FLASH ROMs) 
  • IP•Tube GT1 SS7 SIG is fully operational during upgrade 
Dimensions:
  • Dimensions: 9" (L) x 7.3” (W) x 1.50” (H): 1/2 Rack Wide 1U High
Environmental:
  • 0° to 132° F (-10° to 50°C ) operating temperature
  • Up to 90% operating humidity (non-condensing)
  • Optional Extended Temperature Range available
Regulatory: 
  • CE • Safety -IEC60950 • EMC - CFR 47 Part 15 Sub Part B:2002, EN55022:1994+A1&A2, EN55024, ICES-003 1997, CISPR 22 Level A
  • Telecom Part 68
Management:
  • Telnet support with Edit and Paste Template Files
  • Console Port for Out of Band Management
  • SNMP support (MIB I, MIB II) with configured traps
  • Remote config., monitoring, & reset
  • Telco Diagnostics: Local Loop, Remote Loop
Power: 
  • 12-30 VDC, 1.0A. Locking Connector • Optional -48V 0.25 Amp 

 

How to Order:

Part No Description
Notes
307-1544-0x-yy IP•Tube GT1 SS7 SIG Models with 1-4 T1 Ports 0x; 1-24 SS7 DS0s yy 
PRO Protector Option Fault Tolerant Network Interconnect 
D&I Drop and Insert Option Provides in line access to SS7 timeslot(s) 
MUX Multiplexor Option Support for 24 SS7 DS0s to 1 T1 
Power Options  Specify as suffix - Combine 2 for Hot Standby 
DCMOD Power Module 12/26 VDC/AC ADAPTER Ships with Universal Adapter 100/240 50/60 
WIREDC Power Supply Module 12/26 VDC Screw Term  
N48VDC Power Supply Module Negative 48 Volt DC Isolated Negative 48 Volt Power 
Rack Mount Option  Specify as suffix 
RACKMNT 19/23" Wide Rack Mount Brackets Enclosure Nut Serts Installed