Skip to content

Australian Utilities and Scada Technologies

Get the Flash Player to see this player.
IP Tube E2: LAN to LAN IP BridgeIP Tube GE1 SS7 MON
IP Tube E3
View Full-Size Image


IP Tube E3

Price per Unit (piece): Call for Pricing

Ask a question about this product

E3 Voice, Video and Data Over IP:

The IP Tube E3 encapsulates E3 circuits into IP Ethernet packets. The conversion of E3 circuits into packets enables organizations to dramatically reduce leased line costs by exploiting the effciency of Ethernet networks. E3 Toll charges assessed by long distance and local carriers are eliminated or dramatically reduced for: 

  • Competitive Local Exchanges
  • Internet Service Providers
  • Education: K-12 and Universities
  • Multi-Site Enterprises
  • Cellular Service Operators
  • Governments and Municipalities

Transparent Protocol and Singnalling

THe IP Tube E3's transparent operation maintains the proprietary signalling required to support call conferencing, call fowarding, caller IP and SS7. Transparent support for Modems, Fax, or Data circuits. Preserves toll-quality voice across the network. 

The IP tube E3's low latency E3 Over IP connection provides for the transparent interconnection of communication systems via LANs, WANs, MANs, IP Satellite and Wireless Ethernet.

 

IP Tube E3 Standard Featues: 

Service Quality Packet Prioritizing 

The IP Tube E3 uses the Type of Service byte in the IP packets to priortize the encapsulated E3 frames. The settings of the TOS byte can be used to ensure that the real time TDM data from the IP Tube E3 is ensured high priority. Additionally 802.1p/q VLAN tagging provides layer 2 prioritazation.

Management Interfaces 

Management of the IP Tube E3 is accomplished with a Command Line interface that is accessed through a Console or Telnet connection. Templates of the most common configuration provide for an Edit and Paste configuration. SNMP MIB l and ll support, with traps, is a standard feature. 

 IP Tube E3 Options:

Alternator Load Balancing Option

The IP TUbe E3-ALT Alternator option alternatively sends the IP packetized E3 frames on LAN 1 and LAN 2. The Alternator option enables the bandwidth required to transport E3 circuits to be split over two WAN connections.

 

 

Protector Option

The protector option utilizes the second LAN interface as a redundant path for the interconnection of the IP encapsulated E3 Circuit. The extension of the E3 circuit has a fault tolerant link that is configured to always on, or with switch over criteria. 

 

 

 Rack Mount Kit:

The IP Tube family is ready for your most demanding central office or data center environments. With the Rack Mount Kit, IP Tube products are easily installed in 19" and 23" racks. Easy access to both front and rear sides faciliates technician maintenance procedures. 

Technical Specifications:

LAN Network Interface: 
  • Two 10/100BaseT Full/Half Ethernet
  • Autonegotiation or Configured Speed/Duplex
LAN Network Protocols Supported: 
  • IP, TCP, UDP, ICMP
E3 Specifications: 
  • One E3 Interface
  • Framing - unFramed Full E3, G.751
E3 Over IP Protocol: 
  • TDM Over IP
  • Circuit Extension Services Over IP
  • Low Latency: less than 500 micro seconds
Quality of Service Support: 
  • IP Type of Service (TOS) CLI configured
  • IANA Registered UDP Port 3175
  • 802.1p/q VLAN tagging provides
    layer 2 prioritization
Management: 
  • Telnet support with Edit and Paste Template Files
  • Console Port for Out of Band Management
  • SNMP support (MIB I, MIB II)
    with configured traps
  • Remote config., monitoring, & reset
  • Telco Diagnostics: Local Loop, Remote Loop
TFTP Online Upgrade Capable
  • IPTube is fully operational during upgrade
Regulatory: 
  • CE • Safety -IEC60950 • EMC - CFR 47 Part 15 Sub Part B:2002, EN55022:1994+A1&A2, EN55024, ICES-003 1997, CISPR 22 Level A
Rear Panel/Power: 
  • 10-30 VDC, 1.0A.
  • Screw Locking Connector
  • Universal Adapter 100/240 VAC 50/60 Hz
  • Optional -48V 0.25 Amp • Hot Standby
  • Dimensions: 9" (L) x 7.3” (W) x 1.50” (H)

 

How to order: 

Part No Description
Notes
043-4368-0x IP•Tube E3 (x=1 - 2 Ports) Base Model Specify # of E3 Ports Enabled
PRO Protector OptionFault Tolerant Network Interconnect
ALT Alternator Load Balancing OptionLoad Balancing Inverse Mux
Power Options  
Specify as suffix 
DCMOD Power Supply Module 12-30 VDCShips with Universal Adapter 90/240 50/60
N48VDC Power Supply Module Negative 48 Volt DC Isolated Negative 48 Volt Power 
Rack Mount Option  Specify as suffix
RACKMNT 19/23" Wide Rack Mount Brackets Enclosure Nut Serts Installed