Skip to content

Australian Utilities and Scada Technologies

Get the Flash Player to see this player.
2 asynchronous lines RS232, RS422, RS485 + 1 parallel port with IP Express DLT1
IP Express DLE1
View Full-Size Image


IP Express DLE1

Price per Unit (piece): Call for Pricing

Ask a question about this product

The IP•Express DLE1 interconnects remote LANs and addresses the large market for connectivity in the multi-megabit bandwidth range such as high quality MPEG Video delivery. The Integration of the E1 CSUs provides for a complete solution with a straight forward configuration.

E1 Branch Office Connectivity:

 

 

Two E1 Inverse Packet Multiplexor:

Inverse Packet Multiplexing is an option of the IP Express DLE1. IPM delivers 4 Megabits of interconnectivity over 2 Dedicated E1 WANs. IETF approved RFC1990 Multilink PPP protocol bonds multiple E1s into a high-speed link that has built-in redundancy. E1 line fault detection provides resilient connectivity for Mission Critical Interconnects.

MPEG IP Multicast Streaming Video:

IP Express DLE1-IPM models deliver MPEG IP Streaming Video over Inverse Packet Multiplexed T1s. The Inverse Packet Multiplexor provides the bandwidth necessary for the delivery of broadcast quality video feeds for a single MPEG Video. IP Multicast is a standard feature of the IP•Express DLE1 and is utilized to distribute MPEG video simultaneously to multiple decoders.

MPEG IP Video Redundancy Switch: 

REDundant IP Video configuration automatically switches from the Primary to a Secondary Encoder's IP Video Stream for mission critical broadcasts and is available with the IP Express DLE1-IPM-RED. A one second absence of IP packets from the Primary Encoder results in the switch to the Secondary Encoder. The WAN bandwidth is reserved for a single feed.

Technicial Specifications:

LAN Network Interface: 
  • 10/100 BaseT Ethernet Port
  • Auto-negotiate or Configured
    Speed/Duplex
LAN Network Protocols Supported:
  • IP, TCP, UDP, RIP, ICMP
  • IP Multicast support
  • IP Video Stream Redundancy (Optional)
WAN Network Interfaces: 
  • Four E1/FracE1 CSU/DSU ports
  • Inverse Packet Multiplexing (Optional)
WAN Network Protocols Supported: 
  • PPP (RFC 1548, RFC 1332, RFC 1334, PAP)
  • Multilink PPP (RFC 1990)
  • Frame Relay (ANSI ANNEX D, LMI, RFC 1420)
Routing Protocols Supported: 
  • RIPv1, Static 
E1/Fractional E1 Specifications: 
  • Framing - CRC4 or FAS or UNFRAMED
  • Coding - HDB3 or AMI
  • Supports DS0 assignments from 1 to 32 (64Kbps to 2.048Mbps)
E1 Diagnostic: 
  • Loopback Test
    Network, Internal, Framer, Payload
  • Bert Tests
    2E07,2E11,2E15,QRSS
TFTP Online Upgrade Capable: 
  • Fully operational during upgrade 
Network Security: 
  • Full On Source, Destination Address;
    Port and Flag IP Packet filtering
  • Network, Device and Application Layers.
Dimensions:
  • 9" (L) x 7.3" (W) x 1.50" (H)
  • 2 E1 Wan Connectivity in 1/2 of a 19" rack
Management: 
  • Telnet support with Edit and Paste
    Templates
  • Console Port for Out of Band
    Management
  • SNMP support (MIB I, MIB II)
  • Remote configuration, monitoring, & reset
Regulatory: 
  • Safety -IEC60950
  • EMC - CFR 47 Part 15 Sub Part B:2002
                EN55022:1994+A1&A2
                EN55024, ICES-003 1997
                CISPR 22 Level A
  • Telecom TBR12, TBR13
  • CE
Power: 
  • Locking Power Connector
  • 12-24 VDC 1.0A
    Ships with Universal Adapter
  • Optional -48V 0.25 Amp
  • Hot Standby with 2nd Power Module

 

How to Order:

Part No Description Notes 
095-2048-0x IP•Express DLE1, xE1 (x=1 - 2 Ports) Base Model Specify # of E1 Ports Enabled 
U95-2048-0x IP•Express DLE1 E1 Port Upgrade Enable Additional E1 Ports (up to 2)
Base Options  Specify as suffix 
IPM Inverse Multiplexor Option IPM 4 Mbps Interconnet over 2
Dedicated E1 WANs
RED MPEG IP Video REDundancy Switch Secondary Encoder Traffic passed on failure of Primary Encoder 
Power Options  Specify as suffix 
DCMOD Power 12/30 VDC w LOCKING CONNNECTOR Ships with Universal Adapter 90/240 50/60 
N48VDC Power 12/30 VDC Stripped Wire Screw  
Rack Mount Option Power Supply Module Negative 48 Volt DC Isolated Negative 48 Volt Power Hot Standby 
RACKMNT  Specify as suffix 
 19" Wide Rack Mount Brackets Enclosure Nut Serts Installed