Skip to content

Australian Utilities and Scada Technologies

Get the Flash Player to see this player.
IP Tube SS7 SIG V35IP Tube V35 HS
IP Tube T3
View Full-Size Image


IP Tube T3

Price per Unit (piece): $200.00

Ask a question about this product

 

 T3 Voice, Video and Data Over IP:

The IP Tube T3 encapsulates DS3 circuits into IP Ethernet packets. The conversion of T3 circuits into packets enables organizations to dramatically reduce leased line costs by exploiting the efficiency of Ethernet networks. T3 Toll charges assessed by long distance and local carriers are eliminated or dramatically reduced for:

  • Competitive Local Exchanges
  • Internet Service Providers
  • Education: High Schools and Universities
  • Multi-Site Enterprises
  • Cellular Service Operators
  • Governments and Municipalities 

Transparent Protocol and Signalling:

The IP Tube T3's transparent operation maintains the proprietary signaling required to support call conferencing, call forwarding, caller ID and SS7. Transparent support for Modem, Fax, or Data circuits. Preserves toll-quality voice across the network.

The IP Tube T3's ow latency T3 Over IP connection provides for the transparent interconnection of Private Branch Exchanges, Mobile Switching Centers, Telecom Switches and T3 based communication systems via LANs, WANs, MANs, IP Satellite and Wireless Enthernet.

IP Tube T3 Standard Features:
The IP Tube T3 uses the Type of Service byte in the IP packets to prioritize the encapsulated T3 frames. The setting of the TOS byte can be used to ensure that the real time TDM data from the IPTube T3 is ensured high priority. Additionally 802.1p/q VLAN tagging provides layer 2 prioritization.
 
Management Interface:

Management of the IP TUbe T3's accomplished with a Command Line Interface that is accessed through a Console or Telnet connection. Templates of the most common configuration provide for an Edit and Paste configuration. SNMP MIB I and II support, with traps, is a standard feature.

IP Tube T3 Options:

The IP Tube T3-ALT Alternator option alternatively sends the IP packetized T3 frames on LAN 1 and LAN 2. The Alternator option enables the bandwidth required to transport T3 circuits to be split over two WAN connections. 

 

 

Protector Option:

The protector option utilitizes the second LAN interface as a redundant path for the interconnection of the IP encapsulated T3 Circuits. THe extention of the T3 circuits has a fault tolerant link that is configured to always on, or with switch over criteria.

 

Rack Mount Kit:

The IP-Tube family is ready for your mosr demanding central office or data center environments. With the Rack Mount Kit, IP Tube products are easily installed in 19" and 23" racks. Easy access to both front and rear sides facilitates maintenance procedures. 

Technicial Specifications:

LAN Network Interface: 
  • Two 10/100BaseT Full/Half Ethernet
  • Autonegotiation or Configured Speed/Duplex
LAN Network Protocols Supported: 
  •  IP, TCP, UDP, ICMP
T3 Specifications: 
  • One DS3 Interfaces
  • Framing - unFramed Full T3
T3 Over IP Protocol: 
  • TDM Over IP
  • Circuit Extension Services Over IP
  • Low Latency: less than 500 micro seconds
Quality of Service Support: 
  •  IP Type of Service (TOS) CLI configured
  • IANA Registered UDP Port 3175
  • 802.1p/q VLAN tagging provides
    level 2 prioritization
Management: 
  • Telnet support with Edit and Paste Template Files
  • Console Port for Out of Band Management
  • SNMP support (MIB I, MIB II)
    with configured traps
  • Remote config., monitoring, & reset
  • Telco Diagnostics: Local Loop, Remote Loop
TFTP Online Upgrade Capable 
  • IPTube is fully operational during upgrade 
Regulatory:
  • CE • Safety -IEC60950 • EMC - CFR 47 Part 15 Sub Part B:2002, EN55022:1994+A1&A2, EN55024, ICES-003 1997, CISPR 22 Level A
  • Telecom Part68
Rear Panel/Power: 
  • 12-30 VDC, 1.0A.
  • Screw Locking Connector
  • Universal Adapter 100/240 VAC 50/60 Hz
  • Optional -48V 0.25 Amp • Hot Standby
  • Dimensions: 9" (L) x 7.3” (W) x 1.50” (H)

 

How to Order: 

Part No Description Notes 
046-4436-0x IP•Tube T3 (x=1 - 2 Ports) Base Model Specify # of T3 Ports Enabled 
PRO Protector Option Fault Tolerant Network Interconnect 
ALT Alternator Load Balancing Option Load Balancing Inverse Mux 
Power Options  Specify as suffix 
DCMOD Power Supply Module 12-30 VDC Ships with Universal Adapter 90/240 50/60 
N48VDC Power Supply Module Negative 48 Volt DC
Isolated Negative 48 Volt Power
Rack Mount Option  Specify as suffix 
RACKMNT 19/23" Wide Rack Mount BracketsEnclosure Nut Serts Installed