Skip to content

Australian Utilities and Scada Technologies

Get the Flash Player to see this player.
IP Tube DLT1-EcanIP Tube E3
IP Tube E2: LAN to LAN IP Bridge
View Full-Size Image

IP Tube E2: LAN to LAN IP Bridge

Price per Unit (piece): Call for Pricing

Ask a question about this product


The IP Tube E2 is used to interconnect Ethernet LANs through an IP network. Ethernet frames that are destined for a device located on the remote network are encapsulated into IP packets. The IP packets, with the encapsulated Ethernet frames, are sent to the IP address of the destination network's IP Tube E2 where the IP envelope is removed and the original Ethernet Frames are delivered to the destination network's Ethernet device.

The Ethernet MAC layer source addresses that are active on the internal LAN are stored in a filtering database. Packets with a MAC destination that do not match a MAC address entry for the receiving port are encapsulated in an IP packet that is forwarded to the remote network.

Service Quality Packet Prioritizing
The IP Tube E2 uses the Type of Service byte in the IP packets to prioritize the encapsulated Ethernet frames. The setting of the TOS byte can be used to ensure that real time data from the IP Tube E2 is ensured high priority. Additionally 802.1p/q VLAN tagging provides layer 2 prioritization.

Rack Mount Kit
The IP-Tube family is ready for your most demanding central office or data center environments. With the Rack Mount Kit, IPTube products are easily installed in 19" and 23" racks. Easy access to both front and rear sides facilitates technician maintenance procedures.

Technicial Specifications: 

LAN Network Interface: 
  • Two 10/100BaseT Full/Half Ethernet
  • Autonegotiation or Configured
LAN Network Protocols Supported: 
Quality of Service Support: 
  • IP Type of Service (TOS) CLI configured
  • IANA Registered UDP Port 3175
  • 802.1p/q VLAN tagging provides
    layer 2 prioritization
  • Telnet support with Edit and Paste
    Template Files
  • Console Port for Out of Band
  • SNMP support (MIB I, MIB II)
    with configured traps
  • Remote config., monitoring, & reset
TFTP Online Upgrade Capable 
  • IPTube is fully operational during upgrade
  • CE • Safety -IEC60950 • EMC - CFR 47
    Part 15 Sub Part B:2002,
    EN55022:1994+A1&A2, EN55024,
    ICES-003 1997, CISPR 22 Level A
Rear Panel/Power: 
  • 10-30 VDC, 1.0A.
  • Screw Locking Connector
  • Universal Adapter 100/240 VAC 50/60 Hz
  • Optional -48V 0.25 Amp • Hot Standby
  • Dimensions: 9" (L) x 7.3” (W) x 1.50” (H)


How to Order: 

Part No Description Notes 
040-1002  IP•Tube E2 
Power Options  Specify as suffix 
DCMOD Power Supply Module 12-30 VDC Ships with Universal Adapter 90/240 50/60 
N48VDC Power Supply Module Negative 48 Volt DC Isolated Negative 48 Volt Power 
Rack Mount Option  Specify as suffix 
RACKMNT 19/23" Wide Rack Mount Brackets Enclosure Nut Serts Installed